| Customization: | Available |
|---|---|
| Conditions of Use: |
Generator |
| Usage: | Generator |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
original Product for Diesel/Gasoline/Gas Genset Parameters Monitor DC60D Generator Set Controller
Genset Controller DC60D Series
- This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop,Parameters monitoring, faults-checking as
well as data setting.
- 4.3 inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be
displayed directly. All the parameters can be displayed by simulated indicators and words.Besides, LCD screen can display various
faults in the same time that the genset will be stopped once it can not work smoothly.
- There are Chinese/English interface options, more language can be set according to user's request. All the parameters can be
configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC.It can be widely applied
for all kinds of auto control system of gensets.
Performance and characteristics
The DC6xD series is available in four models:
DC60D: used for stand-alone automation, which controls the automatic start and stop of the generator set by remote start signal;
DC62D: Adding the mains monitoring and mains/generation automatic switching control (AMF) function on the basis of DC60D, it is
applicable to the single-machine automation system consisting of one generator unit.
DC60DR: Add RS485 interface based on DC60D;
DC62DR: Add RS485 interface based on DC62D;
Main Features:
- 32 units Micro-procession technology is used.
- 4.3 inch TFT colorful big screen LCD, option language interface(Chinese/English), user's language set if necessary.
- Indicator and number display through UI surface.
- Acrylic material is adapted to protect the screen.
- Silicone panels;
- USB Port: parameters can be set even without power through USD port to monitor in real time.
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or
month.
- Three class protection countdown function, which can set the maintenance time or date.
- Records function: relative faults shall be recorded in real time.
- Totally 6 relay's output, among which 4 relay output can be self-configurable, each relay can be set as max 25 functions,
besides, there are 4 groups as non-contact terminals.
- 5 switch value input, and each can be set as max 30 functions.
- 3 sensor simulation input connectors, 6 input types is configurable and various kinds of units can be set.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions(RPM,Frequency, Oil Pressure) can be chosen
- Control Protection:Auto Start/Stop of genset,load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
- Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement
can be more easily.
Parameters Display:
Engine RPM
Engine oil pressure
Engine water temperature
Engine fuel temperature
Engine cylinder temperature
Engine Tank temperature
Engine fuel level
Engine battery voltage
Charging voltage
Mains Frequency (only for DC62D)
Mains phase voltage L-N(only for DC62D)
Mains phase voltage L-L(only for DC62D)
Generator 3 Phase voltage L-N
Generator 3 Phase voltage L-L
Generator 3 phase current A
Generator Frequency Hz
Generator Power Factor COSφ
Generator active power KW
Generator apparent power KVA
Generator reactive power KVar
Current loading rate %
Total average loading rate %
Current consumption KWH
Total consumption Kwh
Total Crank times
Current running time
Total running time
Three classes maintenance notice
Protection:
Over speed
Under speed
Low oil pressure
High water temperature
High Oil temperature
High Cylinder Temperature
High Tank temperature
Low fuel level
Low oil level
External emergency alarm
D+ Opened
RPM Lost
Sensor Open
Over Frequency
Under Frequency
Over voltage
under voltage
over current
Non-balance of current
Over power
Lack of Phase
reverse phase sequence
Gen load failure
Gen unload failure
Mains Load failure
Mains unload failure
Primary maintenance expire
Secondary maintenance expire
Maintenance expire
Low water level alarm
Emergency Stop
Crank failure
Over battery voltage
Under Battery voltage
Charging failure
Battery Charging failure
Stop Failure
OptionsParameters
Working voltageDC8V----36V Continuous
Power consumptionStandby24VMAX 1W
Working24VMAX 5W
AC Voltage Input1P2W 30VAC-276VAC(ph-N)
2P3W 30VAC-276VAC(ph-N)
3P4W 30VAC-276VAC(ph-N)
Rotate speed sensor Frequency200-10000Hz
MAX Accumulating Time99999.9HoursMin Store time:6min
Fuel Relay Output16Amp DC+VE Supply voltage
Start Relay Output16Amp DC+VE Supply voltage
Programmable Relay output 15Amp DC+VE Supply voltage
Programmable Relay output 25AMP Non-contact-Normal open--Normal close output
Programmable Relay output 35AMP Non-contact Normal Open output
Programmable Relay output 45AMP Non-contact normal open output
Excitation outputMax 1AMP DC+VE supply voltage
Switch value inputAvailable if connecting with Battery -
Working condition-20-65
Storage condition-40-85
Protection LevelIP54when waterproof rubber gasket is added between controller and its panel
Overall dimension210mm*160mm*50mm
Panel cutout186mm*142mm
Fu'an Shaluo Electronics co.Ltd is a manufacturer of generator accessories, Our company has established a long term and stable business relationship with a number of domestic agents and retailers.
The professional person responsible for the quality of supervision and control in the entire process.
In order to get the superior quality we only use selected good element.
Aimed at enabling the production department to manufacture and assemble the product as efficiently as possible.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
){kind=link}