Replace Hgm4010 Dse4610 DC40s Mabey Diesel Gas Gasoline Generator Engine Controller Module Panel DC42s Replace Hgm4020 Dse4620

• Customization: Available
• Conditions of Use: Generator
• Usage: Generator
• Model NO.: DC40S Dse4610 Hgm4010
• Holecut: 176*142mm
• Function: Control Generator
• Warranty: 1 Year
• Application: Diesel Generator
• DC: 8~36V
• Transport Package: Cartons
• Specification: 1kg
• Trademark: SHALUO
• Origin: Fujian, China
• Package Size: 15.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 1.200kg

Product Description

Product Description

1. Summary

This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as
well as data setting. 2.8 inch LCD screen display with brand new UI design is adapted in this controller that the relative
failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can
display various faults in the same time that the genset will be stopped once it can't work
smoothly.
There are Chinese/English interface options, more language can be set according to user's request. All the parameters can be
configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied
for all kinds of auto control system of gensets.

2. Main Features

There are ten Models under DC4xS/C series.
DC40S: Used for single machine automation. Start/Stop through remote start signal.
DC40SR: Based on DC40S, it adds RS485 port.
DC42S: Based on DC40S, it adds Mains monitoring and AMF (Mains/Generator
automatic switching control), especially suitable for the automation system composed by mains and genset.
DC42SR: Based on DC42S, it adds RS485 port.
Dual core 32bit high performance single chip microcomputer. 2.8 inch 240 * 128 high-resolution LCD screen, Available in 6
languages, user's language set if necessary. Indicator and number display through UI surface. Acrylic material is adapted to
protect the screen. Silicone panels;
USB Port: parameters can be set even without power through USB port to monitor in real time. With RS485 communication port,
can achieve "Three Remote" functions via MODBUS protocol. Standard CAN communication port, built-in J1939 protocol, has matched
more than 40 kinds of engines;
Various kinds of parameters display. DC4xS/C GENSET CONTROLLER USER MANUAL
Input/output function, status can be shown directly. Real time clock inside: preset time operate and auto maintenance is
available. Genset working plan can be set as per week or month. Maintenance countdown function, can set maintenance time or
date. The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is
convenient to find the cause of the fault. Totally 6relay's output, among which 4 relay output can be self-configurable, each
relay can be set as max 20 functions. With 4 switches input, up to 20 functions optional;
3 sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units
can be configured. Battery charging control function,which can protect the battery according to battery voltage status. Sensor
can be self-defined by front face button or PC software. Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen. Control Protection: Auto Start/Stop of genset, load
transfer (ATS control) and perfect failure display and protection. Standard water-proof rubber gasket. The waterproof can reach
IP54
Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement
can be more easily.

3. Parameters Display

Engine RPM
Engine oil pressure
Engine temperature
Engine fuel level
Engine battery voltage
Charging voltage
CAN related parameters(C series only)
Mains Frequency (only for DC42S/C)
Mains phase voltage L-N (only for DC42S/C)
Mains phase voltage L-L (only for DC42S/C)
Generator 3 Phase voltage L-N
Generator 3 Phase voltage L-L
Generator 3 phase current A
Generator Frequency Hz
Generator Power Factor COS φ
Generator active power KW
Generator apparent power KVA
Generator reactive power KVar
Real-time load rate %
Current load rate %
Average loading rate %
Current consumption KWH
Total consumption KWH
Total Crank times
Cumulative power on time of controller
Current running time
Total running time
Maintenance notice
Switches input status display
Output status display of relays
Current date and time;
4. Protection
Over speed
Under speed
Low oil pressure
High temperature
Low fuel level
External emergency alarm
D+ open
RPM Lost
Sensor Open
Over Frequency
Under Frequency
Over voltage
Under voltage
Over current
Non-balance of current
Over power
Maintenance expire
Low water level alarm
Emergency Stop
Crank failure
Battery over voltage
Battery under voltage
The charger fails to charge
Charger charging failure
Stop Failure
ECU alarm failure
ECU communication Failure
 

Detailed Images

 

 

 

 

 

Why do you choose us

Our Certifications

 

Our Factory

About the company

    Fu'an Shaluo Electronics co.Ltd is a manufacturer of generator accessories, Our company has established a long term and stable business relationship with a number of domestic agents and retailers.

Factory inspection

The professional person responsible for the quality of supervision and control in the entire process.

Element testing

In order to get the superior quality we only use selected good element.

Assembles products

Aimed at enabling the production department to manufacture and assemble the product as efficiently as possible.
 

FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

Payment & Delivery